EPDM Roofing Installation

Flexible. Long-Lasting. Built for All-Season Protection.

Trusted EPDM Roofing Contractors in Missouri & Illinois

At Revolve Construction, we specialize in EPDM roofing systems designed to meet the needs of commercial buildings and low-slope structures across Missouri and Illinois. Whether you’re planning a new construction or replacing an aging flat roof, our in-house team delivers high-performance results using time-tested materials and precise installation methods.

EPDM (Ethylene Propylene Diene Monomer) is a durable synthetic rubber membrane known for its flexibility, UV resistance, and long service life. It’s an ideal solution for properties exposed to extreme temperature shifts, standing water, and rooftop equipment.

We offer multiple installation methods—fully adhered, mechanically attached, or ballast-weighted—to suit your building’s specific needs. Our team handles every detail, from substrate prep to edge sealing, to ensure a watertight and energy-efficient system that lasts for decades.

Why Trust Revolve for EPDM Roofing

When it comes to low-slope and flat roofing in Missouri and Illinois, EPDM has earned a reputation for being one of the most cost-effective, long-lasting materials available. At Revolve Construction, we specialize in EPDM roofing installations that offer flexible protection, high UV resistance, and reliable waterproofing year after year.

Our trained, in-house crews handle every part of the job—from inspection and substrate preparation to membrane layout and seam sealing. Whether your project calls for fully adhered, mechanically fastened, or ballasted EPDM installation, we apply the system that best suits your building and environment.

We never outsource or cut corners. That means you can count on accurate estimates, consistent scheduling, and a team that treats your property with care. Every seam is sealed, every drain is tested, and every detail is completed to code.

EPDM isn’t just about affordability—it’s about confidence. Whether you’re upgrading an old roof or outfitting a new build, Revolve Construction delivers EPDM systems that stand up to the Midwest climate and give you lasting peace of mind.

Book a Free Inspection

EPDM Roofing Services

Flexible. Efficient. Built to Last in the Midwest.
Fully Adhered EPDM Systems

Fully Adhered EPDM Systems

Our fully adhered EPDM systems are bonded directly to the insulation layer, offering superior wind resistance and a smooth, seamless finish. This method is ideal for low-slope roofs that demand long-term performance and minimal maintenance.

Ballasted EPDM Roofing

Ballasted EPDM
Roofing

Using large sheets of EPDM membrane held in place with stone ballast, this method is cost-effective and quick to install. Perfect for wide-span commercial roofs, it allows for fast drainage and excellent weather protection.

Mechanically Attached EPDM

Mechanically Attached
EPDM

With this option, we secure the membrane using fasteners and plates at the seams—ideal for roofs with structural concerns or specific weight limitations. It’s flexible, secure, and easy to inspect or repair.

Roof Replacement & Repair Services

Roof Replacement & Repair Services

We replace worn-out roofing systems with fresh EPDM membranes, designed for energy efficiency, leak prevention, and long-term reliability. Our team also handles puncture repairs, resealing, and insulation upgrades.

Trusted EPDM Roofing Experts

Seamless Systems. Smart Installation. Built to Endure

At Revolve Construction, every EPDM roofing project starts with a clean surface and ends with a precisely installed membrane system that’s built for decades of performance. We don’t cut corners—our in-house team follows exacting standards to ensure every seam is sealed, every edge secured, and every roof completely watertight.

We never outsource your project. That means clear timelines, consistent quality, and skilled crews who know how to deliver results—whether we’re fully adhering a membrane or anchoring it with mechanical fasteners. You can trust that your roof is installed right the first time.

EPDM is built for Midwest weather. Its flexibility in hot and cold climates, resistance to UV rays, and proven longevity make it one of the best roofing choices for flat and low-slope commercial buildings. Whether you’re replacing an old system or starting from scratch, Revolve Construction delivers EPDM roofing that performs under pressure—without fail.

Modern residential construction site at sunset with completed framing

Trusted Team

EPDM ROOFING DONE RIGHT. INSTALLED BY PROS.

EPDM roofing requires precise installation to ensure its full lifespan and leak resistance—and that’s exactly what our in-house team delivers. At Revolve Construction, we handle everything from prep and layout to adhesive bonding and seam finishing with expert care.

We don’t outsource. That means you get consistent quality, better communication, and full accountability from start to finish. Whether you’re replacing an aging membrane or installing EPDM on new construction, we provide secure, flexible, and weather-tough results every time.

Why Choose Revolve for EPDM Roofing

Built for Longevity. Delivered with Precision.
EPDM System Specialists

EPDM System
Specialists

EPDM isn’t just another membrane—it requires expert handling to ensure long-term performance. Our crew is trained specifically in EPDM installation, including seam treatment, membrane bonding, and surface prep for flat and low-slope roofs.

Flexible Installation Options

Flexible Installation
Options

We offer fully adhered, ballasted, and mechanically attached EPDM systems to match your building’s structure and budget. Each method is selected for durability, weather resistance, and long-term return on investment.

Trusted construction performance graphic highlighting Midwest service excellence.

Proven Midwest Performance

EPDM’s flexibility in both hot and cold climates makes it ideal for Missouri and Illinois buildings. It resists shrinking, cracking, UV exposure, and standing water—giving you peace of mind all year long.

Diagram illustrating repair, retrofit, and replacement construction services.

Repair, Retrofit & Replacement Services

Whether you need a new install, a full replacement, or repairs for punctures and aging seams, we handle it all in-house—fast, clean, and built to last.

Complete EPDM Roofing Solutions

Resilient. Cost-Effective. Built for Flat Roof Performance.

  • Single-ply rubber membrane installation
  • Fully adhered, ballasted, or mechanically fastened systems
  • Superior UV, weather, and impact resistance
  • Ideal for commercial and low-slope roofs
  • Installed by certified in-house crews
Get a quote
Early morning view of a commercial construction project in progress
Revolve Construction - Logo

Revolve Construction specializes in roofing, exteriors, and interiors for both residential and commercial projects. With a dedicated team and years of experience, we deliver top-quality results tailored to your needs.

Construction safety checklist icon for project management.
Five-star customer rating icon for top-rated construction services.

5.0 Average Rating (25+ Reviews)

  • 7601 River Walk Ct, St. Louis, MO 63129
Headquarters
  • Monday - Friday: 7:00 AM - 8:00PM
Business Hours
Quick Links
All Rights Reserved. Developed by Revolve Construction LLC 2025
Facebook-f Instagram X-twitter Linkedin Youtube
Scroll to top